Bees & Termites (2)

Working in the bees & termites team involves climbing

Preventing unwelcome advances from the termites is mostly ground work. But dealing with the carpenter bees is a different paradigm altogether. It involves plenty of climbing - sometimes quite high and in challenging corners - on the huts' main structure. This calls for physical and fitness and decent level of dexterity.

Two parts of the epoxy compound

Epoxy is being mixed

Epoxy mix is ready to be used

A hole in hardwood pole

The hole after patching with epoxy

The instructions are simple. Find a bee hole, climb to reach it, then seal it with an epoxy sealant which you or a fellow volunteer mixed for you a few minutes ago. Oh, and be careful not to lose your grip.

The sealant is obtained from the local market as a two part epoxy compound. Its soft and pliable like putty during and soon after mixing. Becomes stiff like plastic in about 10 minutes. Very convenient. But also expensive and probably not very good for the environment. I saw room for improvement here. Experimenting with alternative materials - environmentally friendly and cheap ones, of course - seemed to be an effort worth undertaking.

Bees & Termites (1)

Jacob, a sadhana forest volunteer in bees & termites team

Protecting the huts from ever active termites and carpenter bees is a daily challenge in Sadhana Forest. Bees & Termites team bravely accepts this challenge as a regular maintenance job in Sadhana.

Carpenter bees like to drill hole to make nests in the hardwood poles of the huts' main structure. If not prevented, the bees can hollow out an entire pole to bring the hut down. While bees attack from air, termites have a ground up approach towards the huts. But the end results are pretty much the same.

Local knowledge says that termites don't like walking on granite surface. So granite columns are used as base for the huts. Vegetation around the huts are also cleared regularly to prevent alternative path for termites to reach any part of a hut from ground.